Addagrip Resin Bound Decorative Surfacing Systems (Addaset, Addabound, Terrabound and Terrabase) are resin bound surface course systems comprising a two-component, solvent-free, cold applied polyurethane binder, and fine and coarse 3 mm, 6 mm or 10 mm sized aggregates. They provide a smooth, hard wearing and low maintenance porous/semi porous surface using a range of aggregates. The finished surface is a seamless bound paving system which is flexible and resistant to cracking and can be applied onto asphalt and concrete or other stable substrates. Technical Information Property Value, Unit The 3 mm, 6 mm and 10 mm aggregate based systems have a resistance to Resistance to permanent rut rate and rut depth that is classified as Type 2 in accordance with PD deformation 6691:2015, Appendix D, Table D.2. Laboratory testing to TRL Report 176, Appendix J confirmed satisfactory Tensile bond strength tensile bond strength to both asphalt and concrete when installed in accordance with the provisions of BBA Certificate 16/5288. Laboratory testing in accordance with the BBA HAPAS Guidelines for Erosion index Assessment and Certification of High Friction Surfacing for scuffing at 45°C resulted in an erosion index of less than 3.0. When tested in accordance with BS 903-26:1995, ISO 48 : 1994, the systems Chemical resistance have a good resistance to chemicals likely to be spilt on road surfaces or parking areas, such as oil or petrol. EPD Number: 000209 Date of Issue:27 July 2018 Expiry Date 26 July 2023 BF1805-C Rev 0.0 Page 3 of 8 © BRE Global Ltd, 2017 Property Value, Unit The initial skid resistance (prior to trafficking) measured in accordance with TRL Report 176, Appendix E (pendulum test using sliders applicable to both Skid and slip resistance vehicular and foot traffic), indicates that initial measurements of greater than 50 can be achieved. The systems are considered suitable in applications where this is required. The initial texture depth measured in accordance with B